AI concept · styling reference, not manufactured geometry
Kola.
A desk companion you can redesign.
A desk companion the size of a drink can. Camera, microphone, speaker and a computer; no wheels.
Pre-order only. No payment is taken.
Review the editable model and component list before ordering.
67 × 75 × 129 mm
computedRaspberry Pi 5
catalog17 sourced + 9 printed
computed20 Wh
targetInspect the parts.
Plan your build.
The electronics, hardware and custom printed pieces that make up this design. Edit it in chat to update the parts list and estimate, or pre-order the components below.
See the component breakdown
Sourced components, printed parts, wiring and assembly supplies.
Remix it in chat
Ask for a different size, drive, sensor or finish. The model and parts list update together.
Try it in the playground
Drive the model and try movement commands in a 3D scene. This preview does not simulate physical forces or balance.
Your components
BILL OF MATERIALS| Qty | Part | Line |
|---|---|---|
| 1 | Raspberry Pi 5, 8 GB | $80.00 |
| 1 | Raspberry Pi active cooler | $5.00 |
| 1 | 64 GB microSD, A2 | $9.00 |
| 1 | 1.28 in round IPS display, 240×240 | $12.00 |
| 1 | MAX98357 I²S amplifier with 3 W speaker | $9.00 |
| 1 | I²S MEMS microphone | $7.00 |
| 1 | Camera module 3, wide, 12 MP | $35.00 |
| 1 | BNO085 9-DoF IMU | $20.00 |
| 1 | 2S Li-ion pack, 7.4 V 2600 mAh (19 Wh) | $16.00 |
| 1 | Li-ion balance charger with barrel lead | $14.00 |
| 1 | 5 V 5 A buck converter | $9.00 |
| 1 | Rocker switch and inline fuse holder | $4.00 |
| 1 | M3 socket screw assortment, 6–20 mm, with nuts | $7.00 |
| 1 | M3 heat-set inserts, 100 | $6.00 |
| 1 | M3 nylon standoff kit | $5.00 |
| 1 | Dupont and JST-XH wiring kit with crimps | $8.00 |
| 1 | USB-C cable, 1 m | $3.00 |
| Qty | Part | Process | Line |
|---|---|---|---|
| 1 | Foot pad | FDM, TPU 95A | $3.64 |
| 2 | Shell half | FDM, PA12-CF | $16.82 |
| 2 | End cap | FDM, PA12-CF | $7.38 |
| 1 | Battery tray | FDM, PA12-CF | $4.66 |
| 1 | Board carrier | FDM, PA12-CF | $2.44 |
| 1 | Display bezel | SLS, PA12 | $6.16 |
| 1 | Camera bracket | SLS, PA12 | $5.87 |
| Bought parts | $249.00 |
| Printed parts | $46.97 |
| Instruction book, bags, hex keys estimate | $18.00 |
| One box, shipped estimate | $27.68 |
| Total | $341.65 |
Box 300 × 200 × 120 mm · about 1.3 kg · ships in about 10 days estimate